Views: 0 Author: Site Editor Publish Time: 2022-03-06 Origin: Site
Yesterday we shared the process and tool selection of CNC woodworking engraving machine processing PVC materials, today Leapion laser shared the precautions for using CNC woodworking engraving machine to process PVC materials.
1. When the woodworking engraving machine processes the crystal character PVC Chevron board:
1) Two-dimensional cutting is divided into inner contour, outer contour and original line output, inner contour for hollowing out, outer contour for crystal word, and original line for chamfering line output. The three-dimensional pick angle is not checked when cutting. If you do mosaic, check the mosaic path, (the interval is generally 0.2)
2) During machining, the Z-axis origin is first aligned with the base plate surface, and then the engraving depth set by the computer is subtracted.
3) Try to mirror the original file when processing PVC and Furlong board.
2. Acrylic cutting below 10mm:
The spindle speed is generally 18000-20000, and the engraving speed is generally 400-800;
The moving speed is 1500-2200, and the speed mainly depends on the spacing between the processing graphics.
3. Acrylic cutting above 10mm:
The spindle speed is generally 18000-24000, and the engraving speed is generally 250-600;
The moving speed is generally 1500-2200, and the speed mainly depends on the spacing between the processing graphics.
4. PVC cutting below 10mm:
Spindle speed 18000-24000, engraving speed 1000-1500
The moving speed is 1500-2200, and the speed mainly depends on the spacing between the processing graphics.
5. PVC cutting above 10mm:
Spindle speed 18000-24000, engraving speed 800-1500
The moving speed is 1500-2200, and the speed mainly depends on the spacing between the processing graphics.
6. The thicker the engraving material, the upper limit of the spindle speed and the lower limit of the engraving speed.
7. To keep the size of the word unchanged during cutting, you need to select the outer contour cutting; and when calculating the two-color board and PVC cutting path, you should select "clockwise" to calculate the path for the outline.
The above parameter settings for woodworking engraving machine processing PVC materials are for reference only, and the above parameters are related to operating experience, machine performance, tools, materials, etc. It is recommended that the operator practice according to the above parameter data to form self-data, that is, the actual operation data.
For more information and content of CNC woodworking engraving machine, please consult Leapion Laser.
