Shandong Leapion Machinery Co,.Ltd.
   +86-531-8898-2620    |

Five Tips for Making Clean Cuts with your CNC Router

Views: 0     Author: Leapion     Publish Time: 2022-05-20      Origin:

Five Tips for Making Clean Cuts with your CNC Router

    Making clean cuts with your CNC router is essential for ensuring that your finished workpiece meets your quality standards. Leapion will give you some tips to help you keep those cuts accurate and clean.


1. Proper Installation

    Make sure that the bit is installed securely in the router. The best way to ensure it's in place is to insert it until it bottoms out then slide it out about 1/8th inch and tighten up the collet. This will prevent the bit from becoming loose while you're machining.

2. Clean CNC Router Bits

    Keep you bits sharp, smooth and clean at all times. Material build-up on bits and dull cutting edges will result in heat build-up, which will dull the blades further. If your bits have guide bearings, make sure that they are able to spin freely.

3. Speed Limits

    Not all bits are designed to run at the same speed. Because larger bits have a greater mass, they can cause more vibration at higher speeds. The general rule is, the larger the bit's diameter, the slower the speed.

4. Multiple Passes

    Make multiple passes rather than one heavy cut to prevent tearout and burning. Two or three light passes, increasing the depth of cut gradually, is much preferable for a clear cut.

5. CNC Router Feed Rate

    Don't have your feed rate too high. This will cause the bit to get bogged down and create a rough cut.

    At Leapion we know how important high-quality CNC routers and plasma cutters are for your industry and we want to help you have the best. We stand by every machine we sell, and when it comes to top quality CNC machines, technical support and service, we are second to none. 


    Contact us today to discuss how we can help you finance your CNC purchase.